NSN 5315-00-051-7059
Part Details | HEADLESS SHOULDER PIN
5315-00-051-7059 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 1006263, 7100101, 7-1001-01, 579R407H05, 2182, 5315-00-051-7059, 00-051-7059, 5315000517059, 000517059
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | MAY 13, 1967 | 00-051-7059 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
SQUARE
CHAMFERED
SQUARE
ONE END DRILLED
SHOULDER
Cross Reference | NSN 5315-00-051-7059
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1006263 | 91663 | ARMEL ELECTRONICS INC |
| 7-1001-01 | 27517 | INTRA CONNECTIONS INC |
| 579R407H05 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV NORTHROP GRUMMAN SYSTEMS |
| 2182 | 97952 | YOUNG SPRING AND WIRE CORP |
Technical Data | NSN 5315-00-051-7059
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.376 INCHES MINIMUM AND 0.389 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.156 INCHES NOMINAL |
| SHANK DIAMETER | 0.091 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| OVERALL LENGTH | 0.797 INCHES NOMINAL |
| SECOND SHANK DIAMETER | 0.112 INCHES NOMINAL |
| SECOND SHANK LENGTH | 0.376 INCHES MINIMUM AND 0.389 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.061 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 60.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | SQUARE |
| FIRST END LOCATION | LONG END |
| THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.112 INCHES |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.250 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.031 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.093 INCHES NOMINAL |
