NSN 5315-00-058-3557
Part Details | HEADLESS STRAIGHT PIN
5315-00-058-3557 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
Alternate Parts: 53150583557, MS51932108, MS51932-108, MS51932108, MS51932-108, 5315-00-058-3557, 00-058-3557, 5315000583557, 000583557
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-058-3557 | 02390 ( PIN, STRAIGHT, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
BOTH END DRILLED
Cross Reference | NSN 5315-00-058-3557
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 53150583557 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
| MS51932-108 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| MS51932-108 | 80205 | NATIONAL AEROSPACE STANDARDSCOMMITTEE AEROSPACE INDUSTRIES |
Technical Data | NSN 5315-00-058-3557
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.109 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FIRST HOLE DIAMETER | 0.140 INCHES NOMINAL |
| SECOND HOLE DIAMETER | 0.140 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.215 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.070 INCHES MINIMUM AND 2.080 INCHES MAXIMUM |
| PIN OVERALL LENGTH | 2.500 INCHES MINIMUM AND 2.510 INCHES MAXIMUM |
| PIN OVERALL DIAMETER | 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
