NSN 5315-00-087-3640
Part Details | HEADLESS STRAIGHT PIN
5315-00-087-3640 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
Alternate Parts: 13161162, 13161-16-2, D13161162, D13161-16-2, 13161162, 13161-16-2, 5315-00-087-3640, 00-087-3640, 5315000873640, 000873640
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-087-3640 | 02390 ( PIN, STRAIGHT, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
BOTH END DRILLED
Cross Reference | NSN 5315-00-087-3640
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 13161-16-2 | 81336 | CHIEF OF ENGINEERSDEPT OF ARMY |
| D13161-16-2 | 81336 | CHIEF OF ENGINEERSDEPT OF ARMY |
| 13161-16-2 | 03533 | CRANE CARRIER COMPANY |
Technical Data | NSN 5315-00-087-3640
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.062 INCHES MINIMUM |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.125 INCHES MINIMUM |
| SECOND END TAPER ANGLE | 30.0 DEGREES NOMINAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FIRST HOLE DIAMETER | 0.196 INCHES NOMINAL |
| SECOND HOLE DIAMETER | 0.156 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.312 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.375 INCHES NOMINAL |
| PIN OVERALL LENGTH | 2.312 INCHES NOMINAL |
| PIN OVERALL DIAMETER | 0.5000 INCHES NOMINAL |
