NSN 5315-00-110-2979
Part Details | HEADLESS SHOULDER PIN
5315-00-110-2979 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 9648M58P03, 5315-00-110-2979, 00-110-2979, 5315001102979, 001102979
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | AUG 05, 1968 | 00-110-2979 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
SHOULDER
Cross Reference | NSN 5315-00-110-2979
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 9648M58P03 | 07482 | GENERAL ELECTRIC COMPANYDBA GE |
Technical Data | NSN 5315-00-110-2979
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| SHANK DIAMETER | 0.320 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| OVERALL LENGTH | 0.810 INCHES MINIMUM AND 0.870 INCHES MAXIMUM |
| SECOND SHANK DIAMETER | 0.250 INCHES NOMINAL |
| SECOND SHANK LENGTH | 0.525 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 29.0 DEGREES MINIMUM AND 31.0 DEGREES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| FIRST END LOCATION | SHORT SHANK END |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.525 INCHES NOMINAL |
| SPECIAL FEATURES | SHORT SHANK HAS 2 PARALLEL FLATS 0.176 IN. MIN,0.188 IN. MAX BETWEEN FLATS |
