NSN 5315-00-119-7522
Part Details | HEADLESS SHOULDER PIN
5315-00-119-7522 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: 556AS1442, 556AS144-2, 5315-00-119-7522, 00-119-7522, 5315001197522, 001197522
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | DEC 27, 1972 | 00-119-7522 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
ONE END DRILLED
SHOULDER
Cross Reference | NSN 5315-00-119-7522
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 556AS144-2 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGEDORIGINAL DESIGN ACTIVITY NOT |
Technical Data | NSN 5315-00-119-7522
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.375 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.498 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| SHANK DIAMETER | 0.370 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| OVERALL LENGTH | 2.375 INCHES NOMINAL |
| SECOND SHANK DIAMETER | 0.370 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| SECOND SHANK LENGTH | 1.625 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER LENGTH | 0.125 INCHES NOMINAL |
| SECOND END TAPER ANGLE | 15.0 DEGREES NOMINAL |
| FIRST END LOCATION | LONG END |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| FIRST HOLE DIAMETER | 0.190 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.187 INCHES NOMINAL |
| SPECIAL FEATURES | HOLE TAPPED 10-24 UMC 3B THREAD AND SHORT SHANK CHAMFER TO HAVE A 0.031 IN. RADIUS |
