NSN 5315-00-131-7018
Part Details | HEADLESS STRAIGHT PIN
5315-00-131-7018 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
Alternate Parts: 5315001317018, MS5193262, MS51932-62, NASM51932, 5315-00-131-7018, 00-131-7018, 5315001317018, 001317018
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | DEC 20, 1968 | 00-131-7018 | 02390 ( PIN, STRAIGHT, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
BOTH END DRILLED
Cross Reference | NSN 5315-00-131-7018
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5315001317018 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
| MS51932-62 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| NASM51932 | 80205 | NATIONAL AEROSPACE STANDARDSCOMMITTEE AEROSPACE INDUSTRIES |
Technical Data | NSN 5315-00-131-7018
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.078 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 15.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FIRST HOLE DIAMETER | 0.107 INCHES NOMINAL |
| SECOND HOLE DIAMETER | 0.107 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.138 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.287 INCHES NOMINAL |
| PIN OVERALL LENGTH | 2.594 INCHES MINIMUM AND 2.604 INCHES MAXIMUM |
| PIN OVERALL DIAMETER | 0.3720 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
