NSN 5315-00-143-6526
Part Details | HEADLESS SHOULDER PIN
5315-00-143-6526 A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
Alternate Parts: CS23000001, CS-2300-0001, 5315001436526, 7018188, 5315-00-143-6526, 00-143-6526, 5315001436526, 001436526
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | MAR 14, 1969 | 00-143-6526 | 16749 ( PIN, SHOULDER, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
ROUND
CHAMFERED
ROUND
SHOULDER
Cross Reference | NSN 5315-00-143-6526
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| CS-2300-0001 | 16236 | DLA LAND AND MARITIMEDBA ENGINEERING AND TECHNICAL |
| 5315001436526 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
| 7018188 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 5315-00-143-6526
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | SHOULDER |
| SHANK LENGTH | 0.198 INCHES MINIMUM AND 0.208 INCHES MAXIMUM |
| SHOULDER WIDTH ACROSS FLATS | 0.188 INCHES NOMINAL |
| SHANK DIAMETER | 0.112 INCHES NOMINAL |
| OVERALL LENGTH | 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM |
| SECOND SHANK DIAMETER | 0.125 INCHES NOMINAL |
| SECOND SHANK LENGTH | 0.558 INCHES MINIMUM AND 0.599 INCHES MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.031 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | ROUND |
| SECOND END OUTER RADIUS | 0.062 INCHES NOMINAL |
| FIRST END LOCATION | SHORT SHANK END |
| THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.112 INCHES |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.188 INCHES NOMINAL |
