NSN 5315-00-195-3606
Part Details | HEADLESS STRAIGHT PIN
5315-00-195-3606 A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
Alternate Parts: 5763641, 576364-1, 5763641, 576364-1, 5763641, 576364-1, 5315-00-195-3606, 00-195-3606, 5315001953606, 001953606
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | MAR 18, 1973 | 00-195-3606 | 02390 ( PIN, STRAIGHT, HEADLESS ) |
REFERENCE DRAWINGS & PICTURES
CHAMFERED
CHAMFERED
BOTH END DRILLED
Cross Reference | NSN 5315-00-195-3606
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 576364-1 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INCDIV SENSORS & CONTROLS |
| 576364-1 | 94197 | CURTISS-WRIGHT CORP EAST PATERSONFACILITY |
| 576364-1 | 22525 | INSTRUMENTS AND FLIGHT RESEARCH INC. |
Technical Data | NSN 5315-00-195-3606
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER LENGTH | 0.015 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| FIRST HOLE DIAMETER | 0.062 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| SECOND HOLE DIAMETER | 0.062 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.291 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.959 INCHES NOMINAL |
| PIN OVERALL LENGTH | 3.625 INCHES NOMINAL |
| PIN OVERALL DIAMETER | 0.1870 INCHES MINIMUM AND 0.1872 INCHES MAXIMUM |
| SPECIAL FEATURES | THIRD HOLE 0.062 IN. MIN 0.065 IN.MAX DIA LOCATED ON COMMON VERTICAL CENTER LINE BETWEEN 1ST AND SECONDHOLES APPROX 0.490 IN. FROM THE SECOND HOLE |
| TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
