NSN 5331-00-324-7730
Part Details | O-RING
5331-00-324-7730 A nonmetallic circular item with an aperature, having a solid round cross-section. They are used primarily for sealing. For items with other than round cross section, see PACKING,PREFORMED. For noncircular items with a round cross-section, see SEAL,NONMETALLIC ROUND SECTION and RUBBER,ROUND SECTION.
Alternate Parts: ST7M2518, ST7M251-8, ST7M2518, ST7M251-8, CGR160101258, CGR1601-0125-8, 00239025 F70, 00239-025 F70, ST7M2518, ST7M251-8, 75838, 7583-8, LRC630478, LRC63047-8, MILR25988, MIL-R-25988, 10163280, 9950605A, 9950-605A, ST7M2518, ST7M251-8, SZ75838, SZ7583-8, ST7M2518, ST7M251-8, 5331-00-324-7730, 00-324-7730, 5331003247730, 003247730
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | DEC 03, 1973 | 00-324-7730 | 47946 ( O-RING ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5331-00-324-7730
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| ST7M251-8 | 76301 | BOEING COMPANY, THEDBA BOEING |
| ST7M251-8 | 86044 | CALIFORNIA GASKET AND RUBBERCORPORATION |
| CGR1601-0125-8 | 86044 | CALIFORNIA GASKET AND RUBBERCORPORATION |
| 00239-025 F70 | 1CN74 | FREUDENBERG-NOK GENERAL PARTNERSHIPDBA INTERNATIONAL SEAL COMPANY |
| ST7M251-8 | 1CN74 | FREUDENBERG-NOK GENERAL PARTNERSHIPDBA INTERNATIONAL SEAL COMPANY |
| 7583-8 | SW461 | HUTCHINSON SEAL DE MEXICO STILLMANSEAL DIVISION |
| LRC63047-8 | 55388 | LOADHOLTZ RUBBER CO INC |
| MIL-R-25988 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| 10163280 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
| 9950-605A | 77308 | PARCO INC. |
| ST7M251-8 | 77308 | PARCO INC. |
| SZ7583-8 | 95272 | STILLMAN SEAL CORPORATION |
| ST7M251-8 | 95272 | STILLMAN SEAL CORPORATION |
Technical Data | NSN 5331-00-324-7730
| Characteristic | Specifications |
|---|---|
| MATERIAL | RUBBER FLUOROSILICONE CLASS FQ |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-25988 TYPE 1, CLASS 1, GRADE 70 MIL SPEC SINGLE MATERIAL RESPONSE |
| HARDNESS RATING | 70.0 SHORE DUROMETER A NOMINAL |
| ELONGATION PERCENTAGE | 125 MAXIMUM |
| CENTER HOLE DIAMETER | 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM |
| CROSS-SECTIONAL HEIGHT | 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM |
