NSN 5340-00-080-7811
Part Details | DOUBLE ANGLE BRACKET
5340-00-080-7811 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
Alternate Parts: 216051902, 2-160-519-02, 5340-00-080-7811, 00-080-7811, 5340000807811, 000807811
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | DEC 08, 1967 | 00-080-7811 | 20354 ( BRACKET, DOUBLE ANGLE ) |
REFERENCE DRAWINGS & PICTURES
ANGLE
TWO HOLES
TWO HOLES
ANGLE
TWO HOLES
TWO HOLES
OFFSET DOUBLE ANGLE
Cross Reference | NSN 5340-00-080-7811
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2-160-519-02 | 99193 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
Technical Data | NSN 5340-00-080-7811
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5548 ASSN STD SINGLE MATERIAL RESPONSE |
| FABRICATION METHOD | FORMED |
| SURFACE TREATMENT | PASSIVATE |
| STYLE DESIGNATOR | OFFSET DOUBLE ANGLE |
| FIRST LEG LENGTH | 1.185 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.250 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM |
| CENTER SECTION HEIGHT | 0.472 INCHES MINIMUM AND 0.488 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM |
| FIRST LEG STYLE | ANGLE |
| FIRST LEG END WIDTH | 2.128 INCHES NOMINAL |
| SECOND LEG END WIDTH | 3.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.280 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.508 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.435 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.310 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.220 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| HEAT TREATMENT | ANNEALED |
