NSN 5340-00-091-5471
Part Details | DOUBLE ANGLE BRACKET
5340-00-091-5471 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
Alternate Parts: 241962, 5340-00-091-5471, 00-091-5471, 5340000915471, 000915471
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | JAN 01, 1963 | 00-091-5471 | 20354 ( BRACKET, DOUBLE ANGLE ) |
REFERENCE DRAWINGS & PICTURES
END RADIUS
ONE HOLE
TWO HOLES
END RADIUS
ONE HOLE
TWO HOLES
DOUBLE ANGLE
Cross Reference | NSN 5340-00-091-5471
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 241962 | 77445 | UNITED TECHNOLOGIES CORPORATIONDBA PRATT WHITNEY-SPARE PARTS |
Technical Data | NSN 5340-00-091-5471
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| FIRST LEG LENGTH | 0.645 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.645 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.038 INCHES MINIMUM AND 0.048 INCHES MAXIMUM |
| SECOND LEG THICKNESS | 0.038 INCHES MINIMUM AND 0.048 INCHES MAXIMUM |
| CENTER SECTION HEIGHT | 2.490 INCHES NOMINAL |
| CENTER SECTION WIDTH | 3.434 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.038 INCHES MINIMUM AND 0.048 INCHES MAXIMUM |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG WIDTH | 4.254 INCHES NOMINAL |
| FIRST LEG END RADIUS | 0.205 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.645 INCHES NOMINAL |
| SECOND LEG END RADIUS | 0.205 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.964 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.205 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.205 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SPECIAL FEATURES | FIRST LEG HAS CUTOUT OF 1.000 IN.RADIUS LEAVING 0.500 IN. W ON EACH SIDE |
| END ITEM IDENTIFICATION | ACFT ENG J-57 |
