NSN 5340-00-113-9334
Part Details | DOUBLE ANGLE BRACKET
5340-00-113-9334 A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
Alternate Parts: CE93885, 5340-00-113-9334, 00-113-9334, 5340001139334, 001139334
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | SEP 06, 1968 | 00-113-9334 | 20354 ( BRACKET, DOUBLE ANGLE ) |
REFERENCE DRAWINGS & PICTURES
SQUARE
TWO HOLES
SQUARE
TWO HOLES
DOUBLE ANGLE
Cross Reference | NSN 5340-00-113-9334
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| CE93885 | 98230 | NATIONAL SECURITY AGENCY |
Technical Data | NSN 5340-00-113-9334
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE |
| FABRICATION METHOD | STAMPED AND MACHINED |
| SURFACE TREATMENT | CADMIUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| FIRST LEG LENGTH | 1.125 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.062 INCHES NOMINAL |
| FIRST LEG THICKNESS | 0.062 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.062 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 3.062 INCHES NOMINAL |
| CENTER SECTION WIDTH | 1.750 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.062 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG WIDTH | 1.750 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.750 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.138 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.375 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.275 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.375 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.156 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.375 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.375 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| MOUNTING HOLE TYPE | COUNTERSUNK AND THREADED |
| TEST DATA DOCUMENT | 98230-E93885 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| HEAT TREATMENT | ANNEALED |
