NSN 5905-00-020-3641
Part Details | COMPOSITION FIXED RESISTOR
5905-00-020-3641 A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of a mixture of carbon, an insulating material, and suitable binders, either molded together or applied as a thin layer of conducting material on an insulated form. The opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the item itself. See also ATTENUATOR, FIXED; RESISTOR, FIXED, FILM; and RESISTOR, THERMAL. Excludes SUPPRESSOR, IGNITION INTERFERENCE.
Alternate Parts: 73013402, 730134-02, 646SP2, 58003329111002, 5800332-9111-002, 646SP002, 5905-00-020-3641, 00-020-3641, 5905000203641, 000203641
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 01, 1961 | 00-020-3641 | 00126 ( RESISTOR, FIXED, COMPOSITION ) |
REFERENCE DRAWINGS & PICTURES
TERMINALS ONE END
Cross Reference | NSN 5905-00-020-3641
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 730134-02 | 80249 | BAE SYSTEMS INFORMATION ANDELECTRONIC SYSTEMS INTEGRATION INC. |
| 646SP2 | 10646 | CESIWID INC |
| 5800332-9111-002 | C0426 | HENSOLDT SENSORS GMBH |
| 646SP002 | 72819 | SANDVIK WIRE AND HEATING TECHNOLOGYCORPORATION |
Technical Data | NSN 5905-00-020-3641
| Characteristic | Specifications |
|---|---|
| ELECTRICAL RESISTANCE | 5.000 OHMS |
| RESISTANCE TOLERANCE IN PERCENT | M10.000/P10.000 |
| POWER DISSIPATION RATING IN WATTS | 5.000 FREE AIR |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 40.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 350.0 |
| INCLOSURE METHOD | ENCAPSULATED |
| STYLE DESIGNATOR | 9 TERMINALS ONE END |
| BODY DIAMETER | 0.312 INCHES NOMINAL |
| BODY LENGTH | 1.250 INCHES NOMINAL |
| TERMINAL TYPE | FERRULE |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| CUBIC MEASURE | 0.306 CUBIC INCHES |
| SPECIAL FEATURES | FUSE CLIP TERMINALS |
| TEST DATA DOCUMENT | 80249-730134 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
