NSN 5905-00-096-3334
Part Details | NONPRECISION WIRE WOUND VARIABLE RESISTOR
5905-00-096-3334 A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
Alternate Parts: 3257W501, RTR22DW501M, M390152003WM, M39015/2-003WM, MILR390152, MIL-R-39015/2, 2483227, 248322-7, 5905-00-096-3334, 00-096-3334, 5905000963334, 000963334
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | DEC 08, 1972 | 00-096-3334 | 37406 ( RESISTOR, VARIABLE, WIRE WOUND, NONPRECISION ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR W/MOUNTING HOLES
ROUND, SLOTTED
Cross Reference | NSN 5905-00-096-3334
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3257W501 | 80294 | BOURNS INSTRUMENTS INC |
| RTR22DW501M | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| M39015/2-003WM | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-R-39015/2 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| 248322-7 | 14028 | SYPRIS ELECTRONICS, LLC |
Technical Data | NSN 5905-00-096-3334
| Characteristic | Specifications |
|---|---|
| SECTION QUANTITY | 1 |
| ELECTRICAL RESISTANCE PER SECTION | 500.0 OHMS SINGLE SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO +5.0 SINGLE SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0 TO +50.0 SINGLE SECTION |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| BODY STYLE | RECTANGULAR W/MOUNTING HOLES |
| BODY LENGTH | 0.515 INCHES NOMINAL |
| BODY WIDTH | 0.205 INCHES NOMINAL |
| BODY HEIGHT | 0.500 INCHES NOMINAL |
| LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL |
| ACTUATOR TYPE | SINGLE SHAFT |
| SHAFT STYLE | ROUND, SLOTTED |
| SHAFT DIAMETER | 0.078 INCHES NOMINAL |
| SHAFT LENGTH | 0.045 INCHES MAXIMUM |
| MOUNTING METHOD | CD ANY ACCEPTABLE AND CQ ANY ACCEPTABLE |
| MOUNTING FACILITY QUANTITY | 2 |
| MOUNTING HOLE DIAMETER | 0.073 INCHES NOMINAL |
| TERMINAL TYPE AND QUANTITY | 3 PIN |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| TERMINAL LENGTH | 0.172 INCHES MINIMUM |
| TERMINAL LOCATION | REAR END |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.000 |
| TEST DATA DOCUMENT | 81349-MIL-R-39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-R-39015 TO 2 GOVERNMENT SPECIFICATION |
| OVERALL LENGTH | 0.767 INCHES MAXIMUM |
| OVERALL HEIGHT | 0.500 INCHES NOMINAL |
| OVERALL WIDTH | 0.205 INCHES NOMINAL |
