NSN 5910-00-054-5298
Part Details | GLASS DIELECTRIC FIXED CAPACITOR
5910-00-054-5298 A capacitor, whose capacitance value cannot be adjusted or varied, having a glass (silicas) or glass like substance (e.g., porcelain, vitreous enamel) as the dielectric material. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: 401053381222, 40-105338-1222, 5910-00-054-5298, 00-054-5298, 5910000545298, 000545298
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | MAY 30, 1967 | 00-054-5298 | 00004 ( CAPACITOR, FIXED, GLASS DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-00-054-5298
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 40-105338-1222 | 04655 | GENERAL DYNAMICS MISSION SYSTEMS,INC. |
Technical Data | NSN 5910-00-054-5298
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 1200.000 PICOFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -5.00 TO +5.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 300.0 DC SINGLE SECTION |
| TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 140.0 SINGLE SECTION |
| TOLERANCE OF TEMP COEFFICIENT PER SECTION IN PPM PER DEG CELSIUS | -25.0 TO +25.0 SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES |
| BODY LENGTH | 0.469 INCHES NOMINAL |
| BODY WIDTH | 0.266 INCHES NOMINAL |
| BODY HEIGHT | 0.109 INCHES NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.125 INCHES MINIMUM |
| CASE MATERIAL | GLASS |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.0800 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 11293-40-105338 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CRITICALITY CODE JUSTIFICATION | TEST |
| TERMINAL SURFACE TREATMENT | SOLDER |
