NSN 5910-00-064-8273
Part Details | MICA DIELECTRIC FIXED CAPACITOR
5910-00-064-8273 A capacitor, whose capacitance value cannot be adjusted or varied, having natural sheet mica or reconstituted flaked mica formed into sheets as the dielectric material. It may be a single unit, or consist of two or more fixed units which cannot be separated.
Alternate Parts: DM30F163F, DM30F163F, 3601045314, 360-1045-314, MILC518, MILC5-18, CM07FD163F03, 5910-00-064-8273, 00-064-8273, 5910000648273, 000648273
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUN 29, 1967 | 00-064-8273 | 00005 ( CAPACITOR, FIXED, MICA DIELECTRIC ) |
REFERENCE DRAWINGS & PICTURES
W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE
NO COMMON OR GROUNDED ELECTRODE(S)
Cross Reference | NSN 5910-00-064-8273
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| DM30F163F | 84171 | ARCO ELECTRONICS |
| DM30F163F | 72136 | ELECTRO MOTIVE CORP SUBSIDIARY OFINTERNATIONAL ELECTRONICS CORP |
| 360-1045-314 | 11530 | LOCKHEED MARTIN CORPORATIONDIV LOCKHEED MARTIN INFORMATION |
| MILC5-18 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CM07FD163F03 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5910-00-064-8273
| Characteristic | Specifications |
|---|---|
| CAPACITANCE VALUE PER SECTION | 16000.000 PICOFARADS SINGLE SECTION |
| TOLERANCE RANGE PER SECTION | -1.00 TO +1.00 PERCENT SINGLE SECTION |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 500.0 DC SINGLE SECTION |
| TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS | +0.0 TO +70.0 SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 DEG CELSIUS MINIMUM AND 125.0 DEG CELSIUS MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE |
| BODY LENGTH | 0.770 INCHES NOMINAL |
| BODY WIDTH | 0.900 INCHES MAXIMUM |
| BODY HEIGHT | 0.330 INCHES NOMINAL |
| SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TERMINAL LENGTH | 1.000 INCHES MINIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.394 INCHES MINIMUM AND 0.456 INCHES MAXIMUM |
| CASE MATERIAL | PLASTIC |
| INSULATION RESISTANCE AT REFERENCE TEMP | 1000.0 MEGOHM-MICROFARADS |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.0010 |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| TEST DATA DOCUMENT | 81349-MIL-C-5 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TERMINAL SURFACE TREATMENT | SOLDER |
| INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 33.0 MEGOHM-MICROFARADS |
