NSN 5915-00-401-3573
Part Details | LOW PASS FILTER
5915-00-401-3573 An item designed to pass all frequencies below a specified frequency. Excludes a single inductance, a single capacitance, or a single resistance. See COIL (as modified); REACTOR; CAPACITOR (as modified); and RESISTOR (as modified).
Alternate Parts: 0N0573325, 0N057332-5, 5915-00-401-3573, 00-401-3573, 5915004013573, 004013573
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | SEP 05, 1972 | 00-401-3573 | 13911 ( FILTER, LOW PASS ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE
Cross Reference | NSN 5915-00-401-3573
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 0N057332-5 | 98230 | NATIONAL SECURITY AGENCY |
Technical Data | NSN 5915-00-401-3573
| Characteristic | Specifications |
|---|---|
| REFERENCE FREQUENCY PER FUNCTION | ZZ750.0 MEGAHERTZ |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 40.0 BLANK |
| SOURCE IMPEDANCE RATING PER FUNCTION | ZZ75.0 OHMS |
| LOAD IMPEDANCE PER FUNCTION | ZZ75.0 OHMS |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | B1 CONNECTOR, RECEPTACLE AND F1 TURRET AND N1 TAB, SOLDER LUG |
| STYLE DESIGNATOR | 6 RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| OVERALL LENGTH | 2.090 INCHES NOMINAL |
| BODY OUTSIDE DIAMETER | 0.500 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 CONNECTOR |
| SPECIAL FEATURES | NUT AND LOCKWASHER PROVIDED; CONNECTOR P/N 0N173544 |
| TEST DATA DOCUMENT | 81349-MIL-F-18327 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 98230-0N057332 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| END ITEM IDENTIFICATION | KG-30 KEY GEMTR;CJA |
