NSN 5915-00-450-4676
Part Details | LOW PASS FILTER
5915-00-450-4676 An item designed to pass all frequencies below a specified frequency. Excludes a single inductance, a single capacitance, or a single resistance. See COIL (as modified); REACTOR; CAPACITOR (as modified); and RESISTOR (as modified).
Alternate Parts: 2050753801, 205-075-380-1, 205075380001, 205-075-380-001, 205075380, 205-075-380, 2000, LPF40291, LPF40-29-1, LPF4002B, LPF40-02B, LPF4002B, LPF40-02B, 5915-00-450-4676, 00-450-4676, 5915004504676, 004504676
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | DEC 17, 1969 | 00-450-4676 | 13911 ( FILTER, LOW PASS ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES
Cross Reference | NSN 5915-00-450-4676
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 205-075-380-1 | 97499 | BELL HELICOPTER TEXTRON INC.DBA BELL HELICOPTER |
| 205-075-380-001 | 97499 | BELL HELICOPTER TEXTRON INC.DBA BELL HELICOPTER |
| 205-075-380 | 97499 | BELL HELICOPTER TEXTRON INC.DBA BELL HELICOPTER |
| 2000 | 32186 | CDI INDUSTRIES, INC.DBA COAXIAL DYNAMICS |
| LPF40-29-1 | 55635 | DAYTON-GRANGER INC. |
| LPF40-02B | 55635 | DAYTON-GRANGER INC. |
| LPF40-02B | 58257 | ROCKWELL INTL CORPCOLLINS GENERAL AVIATION |
Technical Data | NSN 5915-00-450-4676
| Characteristic | Specifications |
|---|---|
| REFERENCE FREQUENCY PER FUNCTION | -53.0 |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | ZZ5 |
| FREQUENCY BAND WIDTH PER FUNCTION | -30.00 AND -76.00 |
| INPUT IMPEDANCE PER FUNCTION W/LOAD | Q50.0 |
| OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT | Q50.0 |
| INCLOSURE TYPE | ENCASED |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| OVERALL LENGTH | 4.750 INCHES NOMINAL |
| OVERALL HEIGHT | 1.000 INCHES NOMINAL |
| BODY LENGTH | 3.870 INCHES NOMINAL |
| BODY WIDTH | 2.370 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | ACQ |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.160 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 4.370 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.250 INCHES NOMINAL |
| SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | -30.00 AND -76.00 AND -116.00 AND -232.00 |
| DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | C1.0 AND C1.0 AND B50.0 AND B50.0 |
| OPERATING TEMP RANGE | -25.0 TO +125.0 DEG CELSIUS |
| BODY MATERIAL | METAL |