NSN 5920-00-686-2587
Part Details | BLOCK FUSEHOLDER
5920-00-686-2587 A fuseholder in which the fuseholder stud and/or clips and insulation are mounted on a flat base. Excludes FUSEHOLDER, RECEPTACLE.
Alternate Parts: MILF5373, MS240012, MS24001-2, 5920-00-686-2587, 00-686-2587, 5920006862587, 006862587
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 01, 1963 | 00-686-2587 | 28908 ( FUSEHOLDER, BLOCK ) |
REFERENCE DRAWINGS & PICTURES
SIDE BARRIER TYPE
DIAGONAL TO THE LEFT
Cross Reference | NSN 5920-00-686-2587
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| MILF5373 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MS24001-2 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
Technical Data | NSN 5920-00-686-2587
| Characteristic | Specifications |
|---|---|
| FUSE ACCOMMODATION QUANTITY | 2 |
| CURRENT CARRYING RATING IN AMPS | 60.0 |
| FUSE TERMINAL TYPE ACCOMMODATED | KNIFE BLADE |
| TERMINAL TYPE AND QUANTITY | 4 SCREW |
| CONTACT MATERIAL | 9$DCK0505 |
| CONTACT SURFACE TREATMENT | G0012 ANY ACCEPTABLE |
| BODY STYLE | SIDE BARRIER TYPE |
| OVERALL LENGTH | 3.344 INCHES MINIMUM AND 3.406 INCHES MAXIMUM |
| OVERALL HEIGHT | 1.016 INCHES MAXIMUM |
| OVERALL WIDTH | 1.594 INCHES MAXIMUM |
| BASE THICKNESS | 0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| MOUNTING HOLE STYLE | DIAGONAL TO THE LEFT |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 2 |
| MOUNTING HOLE DIAMETER | 0.204 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| ACCOMMODATED FUSE LENGTH | 0.391 INCHES NOMINAL |
| INTERNAL CIRCUIT CONFIGURATION AND POLE QUANTITY | 2 POLE, MAINLINE, FUSED |
| TEST DATA DOCUMENT | 81349-MIL-F-5373C SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TERMINAL SURFACE TREATMENT | CADMIUM, QQ-P-416 |
| BODY MATERIAL | PLASTIC, MELAMINE, MIL-M-14, TYPE MME AND PLASTIC, SILICONE, MIL-M-14, TYPE MSI-30 |
