NSN 5920-00-931-4232
Part Details | BLOCK FUSEHOLDER
5920-00-931-4232 A fuseholder in which the fuseholder stud and/or clips and insulation are mounted on a flat base. Excludes FUSEHOLDER, RECEPTACLE.
Alternate Parts: MILF213463, MIL-F-21346/3, FH22CM, 5920-00-931-4232, 00-931-4232, 5920009314232, 009314232
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | NOV 16, 1966 | 00-931-4232 | 28908 ( FUSEHOLDER, BLOCK ) |
REFERENCE DRAWINGS & PICTURES
CLIP CONNECTED TYPE
IN-LINE ALONG THE LENGTH
Cross Reference | NSN 5920-00-931-4232
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| MIL-F-21346/3 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| FH22CM | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5920-00-931-4232
| Characteristic | Specifications |
|---|---|
| FUSE ACCOMMODATION QUANTITY | 3 |
| CURRENT CARRYING RATING IN AMPS | 30.0 |
| VOLTAGE IN VOLTS | 250.0 |
| FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| TERMINAL TYPE AND QUANTITY | 6 SCREW |
| SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| CONTACT MATERIAL | ANY ACCEPTABLE |
| CONTACT SURFACE TREATMENT | ANY ACCEPTABLE |
| BODY STYLE | CLIP CONNECTED TYPE |
| OVERALL LENGTH | 2.380 INCHES NOMINAL |
| OVERALL HEIGHT | 0.700 INCHES NOMINAL |
| OVERALL WIDTH | 2.590 INCHES NOMINAL |
| BASE THICKNESS | 0.250 INCHES NOMINAL |
| MOUNTING HOLE STYLE | IN-LINE ALONG THE LENGTH |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | 0.062 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 3 |
| MOUNTING HOLE DIAMETER | 0.138 INCHES NOMINAL |
| ACCOMMODATED FUSE LENGTH | 1.250 INCHES NOMINAL |
| ACCOMMODATED FERRULE DIAMETER | 0.250 INCHES NOMINAL |
| INTERNAL CIRCUIT CONFIGURATION AND POLE QUANTITY | 3 POLE, MAINLINE, FUSED |
| TEST DATA DOCUMENT | 81349-MIL-F-21346 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-F-21346 TO 3 GOVERNMENT SPECIFICATION |
| TERMINAL MATERIAL | BRASS |
| TERMINAL SURFACE TREATMENT | ANY ACCEPTABLE |
| BODY MATERIAL | PLASTIC |
