NSN 5955-00-928-5598
Part Details | QUARTZ CRYSTAL UNIT
5955-00-928-5598 An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
Alternate Parts: CY12A, MILC309842, MILC3098-42, CR64U10M00000, CR64/U10M00000, CR64U10M0, CR64/U-10M0, CR64U10.000MHZ, CR-64/U10.000MHZ, 2897082030, 289-7082-030, 5955-00-928-5598, 00-928-5598, 5955009285598, 009285598
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | AUG 31, 1966 | 00-928-5598 | 00196 ( CRYSTAL UNIT, QUARTZ ) |
REFERENCE DRAWINGS & PICTURES
OVAL BODY, WIRE LEADS
Cross Reference | NSN 5955-00-928-5598
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| CY12A | 13454 | CRYSTEK CRYSTALS CORPORATIONDBA CRYSTEK |
| MILC3098-42 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CR64/U10M00000 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CR64/U-10M0 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CR-64/U10.000MHZ | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| 289-7082-030 | 13499 | ROCKWELL COLLINS, INC.DBA GOVERNMENT SYSTEMS |
Technical Data | NSN 5955-00-928-5598
| Characteristic | Specifications |
|---|---|
| MODE OF OSCILLATION | FUNDAMENTAL |
| CIRCUIT RESONANCE | ANTIRESONANCE |
| LOAD CAPACITANCE IN PICOFARADS | 29.5 MINIMUM AND 30.5 MAXIMUM |
| SHUNT CAPACITANCE IN PICOFARADS | 7.0 MAXIMUM |
| SPECIFIED FREQUENCY | 10.000000 MEGAHERTZ |
| FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | FM0.005/P0.005$$FM0.0010/P0.0010 |
| OPERATING TEMP RANGE | -55.0 TO +105.0 DEG CELSIUS AND -55.0 TO +125.0 DEG CELSIUS |
| EQUIVALENT RESISTANCE VALUE IN OHMS | 30.0 NOMINAL |
| DRIVE LEVEL RATING | 4.0 MILLIWATTS MINIMUM AND 6.0 MILLIWATTS MAXIMUM |
| STYLE DESIGNATOR | 7 OVAL BODY, WIRE LEADS |
| OVERALL LENGTH | 0.530 INCHES MAXIMUM |
| TERMINAL LENGTH | 1.500 INCHES MINIMUM AND 1.525 INCHES MAXIMUM |
| OVERALL WIDTH | 0.435 INCHES MAXIMUM |
| BODY WIDTH | 0.402 INCHES MAXIMUM |
| BODY THICKNESS | 0.150 INCHES MAXIMUM |
| OVERALL THICKNESS | 0.183 INCHES MAXIMUM |
| TERMINAL DIAMETER | 0.015 INCHES MINIMUM AND 0.019 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.184 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| HOLDER COVER MATERIAL | 0$DGS0000 |
| TEST DATA DOCUMENT | 81349-MILC3098-50 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
