NSN 5955-00-930-6071
Part Details | QUARTZ CRYSTAL UNIT
5955-00-930-6071 An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
Alternate Parts: MILPRF309879, MIL-PRF-3098/79, MILC309870, MIL-C-3098/70, CR104U555K0000, CR104/U555K0000, CR104U555K000, CR104/U555K000, 008120225, 0081202-25, 5955-00-930-6071, 00-930-6071, 5955009306071, 009306071
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JUN 15, 1966 | 00-930-6071 | 00196 ( CRYSTAL UNIT, QUARTZ ) |
REFERENCE DRAWINGS & PICTURES
OVAL BODY, WIRE LEADS
Cross Reference | NSN 5955-00-930-6071
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| MIL-PRF-3098/79 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-C-3098/70 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CR104/U555K0000 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CR104/U555K000 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| 0081202-25 | 74306 | PIEZO CRYSTAL CO |
Technical Data | NSN 5955-00-930-6071
| Characteristic | Specifications |
|---|---|
| MODE OF OSCILLATION | FUNDAMENTAL |
| CIRCUIT RESONANCE | ANTIRESONANCE |
| LOAD CAPACITANCE IN PICOFARADS | 21.0 MINIMUM AND 22.0 MAXIMUM |
| SPECIFIED FREQUENCY | 555.000 KILOHERTZ |
| FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | M0.001/P0.001 |
| OPERATING TEMP RANGE | +70.0 TO +80.0 DEG CELSIUS |
| CONTROLLED REFERENCE TEMP | 75.0 DEG CELSIUS |
| FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | M0.001/P0.001 |
| FREQUENCY STABILITY IN PERCENT | M0.0005/P0.0005 |
| OPERABLE TEMP RANGE | -40.0 TO +70.0 DEG CELSIUS |
| EQUIVALENT RESISTANCE VALUE IN OHMS | 2500.0 MAXIMUM |
| DRIVE LEVEL RATING | 1.6 MILLIWATTS MINIMUM AND 2.4 MILLIWATTS MAXIMUM |
| STYLE DESIGNATOR | OVAL BODY, WIRE LEADS |
| OVERALL LENGTH | 0.775 INCHES MAXIMUM |
| TERMINAL LENGTH | 1.500 INCHES MINIMUM |
| OVERALL WIDTH | 0.757 INCHES MAXIMUM |
| BODY WIDTH | 0.725 INCHES MAXIMUM |
| BODY THICKNESS | 0.317 INCHES MAXIMUM |
| OVERALL THICKNESS | 0.352 INCHES MAXIMUM |
| TERMINAL DIAMETER | 0.028 INCHES MINIMUM AND 0.032 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.478 INCHES MINIMUM AND 0.494 INCHES MAXIMUM |
| HOLDER COVER MATERIAL | METAL |
| TEST DATA DOCUMENT | 81349-MIL-C-3098 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-3098 TO 79 GOVERNMENT SPECIFICATION |
