NSN 5955-00-931-7023
Part Details | QUARTZ CRYSTAL UNIT
5955-00-931-7023 An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
Alternate Parts: 3502101, 350210-1, 7109787003, 7109787-003, MILPRF309838, MIL-PRF-3098/38, CR60AU,18MHZ, CR60A-U,18MHZ, CR60U18M00000, CR60/U18M00000, 10132991, CR60AU, 5955-00-931-7023, 00-931-7023, 5955009317023, 009317023
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | MAY 14, 1972 | 00-931-7023 | 00196 ( CRYSTAL UNIT, QUARTZ ) |
REFERENCE DRAWINGS & PICTURES
OVAL BODY, WIRE LEADS
Cross Reference | NSN 5955-00-931-7023
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 350210-1 | 19790 | DATA PRODUCTS CORP |
| 7109787-003 | 93322 | GE AVIATION SYSTEMS LLCDBA GE AVIATION |
| MIL-PRF-3098/38 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CR60A-U,18MHZ | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CR60/U18M00000 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| 10132991 | A486G | NIMIKKEISTOKESKUS NCB FINLAND |
| CR60AU | 00136 | VECTRON INTERNATIONAL, INC. |
Technical Data | NSN 5955-00-931-7023
| Characteristic | Specifications |
|---|---|
| MODE OF OSCILLATION | FUNDAMENTAL |
| CIRCUIT RESONANCE | SERIES RESONANCE |
| SHUNT CAPACITANCE IN PICOFARADS | 7.0 MAXIMUM |
| SPECIFIED FREQUENCY | 18.000 MEGAHERTZ AND 19.700 MEGAHERTZ |
| FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | FM0.005/P0.005$$FM0.0010/P0.0010 |
| OPERATING TEMP RANGE | -55.0 TO +105.0 DEG CELSIUS AND -55.0 TO +125.0 DEG CELSIUS |
| EQUIVALENT RESISTANCE VALUE IN OHMS | 20.0 NOMINAL |
| DRIVE LEVEL RATING | 4.0 MILLIWATTS MINIMUM AND 6.0 MILLIWATTS MAXIMUM |
| STYLE DESIGNATOR | 7 OVAL BODY, WIRE LEADS |
| OVERALL LENGTH | 0.530 INCHES MAXIMUM |
| TERMINAL LENGTH | 1.500 INCHES MINIMUM AND 1.525 INCHES MAXIMUM |
| OVERALL WIDTH | 0.435 INCHES MAXIMUM |
| BODY WIDTH | 0.402 INCHES MAXIMUM |
| BODY THICKNESS | 0.150 INCHES MAXIMUM |
| OVERALL THICKNESS | 0.183 INCHES MAXIMUM |
| TERMINAL DIAMETER | 0.016 INCHES MINIMUM AND 0.019 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.184 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| HOLDER COVER MATERIAL | 0$DGS0000 |
| TEST DATA DOCUMENT | 81349-MILC3098-50 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
