NSN 5955-00-994-9121
Part Details | QUARTZ CRYSTAL UNIT
5955-00-994-9121 An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
Alternate Parts: MILC309826, MILC3098-26, MILPRF309826, MIL-PRF-3098/26, CR47U565K0000, CR47/U565K0000, CR47AU565.000KHZ, CR-47A/U565.000KHZ, 5955-00-994-9121, 00-994-9121, 5955009949121, 009949121
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | APR 04, 1967 | 00-994-9121 | 00196 ( CRYSTAL UNIT, QUARTZ ) |
REFERENCE DRAWINGS & PICTURES
OVAL BODY, PIN TERMINALS
Cross Reference | NSN 5955-00-994-9121
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| MILC3098-26 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-PRF-3098/26 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CR47/U565K0000 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CR-47A/U565.000KHZ | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5955-00-994-9121
| Characteristic | Specifications |
|---|---|
| MODE OF OSCILLATION | FUNDAMENTAL |
| CIRCUIT RESONANCE | ANTIRESONANCE |
| LOAD CAPACITANCE IN PICOFARADS | 20.0 NOMINAL AND 19.5 MINIMUM AND 20.5 MAXIMUM |
| SPECIFIED FREQUENCY | 565.000 KILOHERTZ |
| FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | M0.002/P0.002 |
| OPERATING TEMP RANGE | +70.0 TO +80.0 DEG CELSIUS |
| CONTROLLED REFERENCE TEMP | 75.0 DEG CELSIUS |
| FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | M0.002/P0.002 |
| FREQUENCY STABILITY IN PERCENT | M0.0005/P0.0005 |
| OPERABLE TEMP RANGE | -40.0 TO +70.0 DEG CELSIUS |
| EQUIVALENT RESISTANCE VALUE IN OHMS | 9000.0 NOMINAL |
| DRIVE LEVEL RATING | 2.0 MILLIWATTS NOMINAL AND 1.6 MILLIWATTS MINIMUM AND 2.4 MILLIWATTS MAXIMUM |
| STYLE DESIGNATOR | OVAL BODY, PIN TERMINALS |
| OVERALL LENGTH | 1.023 INCHES MAXIMUM |
| TERMINAL LENGTH | 0.238 INCHES NOMINAL |
| OVERALL WIDTH | 0.757 INCHES MAXIMUM |
| BODY LENGTH | 0.775 INCHES MAXIMUM |
| BODY WIDTH | 0.725 INCHES MAXIMUM |
| BODY THICKNESS | 0.317 INCHES MAXIMUM |
| OVERALL THICKNESS | 0.352 INCHES MAXIMUM |
| TERMINAL DIAMETER | 0.050 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.486 INCHES NOMINAL |
| HOLDER COVER MATERIAL | METAL |
| TEST DATA DOCUMENT | 81349-MILC3098 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
