NSN 5955-01-019-6082
Part Details | QUARTZ CRYSTAL UNIT
5955-01-019-6082 An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
Alternate Parts: CR50AU, MILC309828, MILC3098-28, CR50AU32352000K, CR50AU32-352000K, CR50AU32352HZ, CR50AU32-352HZ, CR50AU32.352KH, CR5-0A/U32.352KH, CR50AU32.352KHZ, CR-50A/U32.352KHZ, 5955-01-019-6082, 01-019-6082, 5955010196082, 010196082
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | APR 17, 1976 | 01-019-6082 | 00196 ( CRYSTAL UNIT, QUARTZ ) |
REFERENCE DRAWINGS & PICTURES
OVAL BODY, PIN TERMINALS
Cross Reference | NSN 5955-01-019-6082
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| CR50AU | 13571 | ELECTRONIC RESEARCH COSUB OF Q-TECH CORP |
| MILC3098-28 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CR50AU32-352000K | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CR50AU32-352HZ | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CR5-0A/U32.352KH | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| CR-50A/U32.352KHZ | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5955-01-019-6082
| Characteristic | Specifications |
|---|---|
| MODE OF OSCILLATION | FUNDAMENTAL |
| CIRCUIT RESONANCE | SERIES RESONANCE |
| SHUNT CAPACITANCE IN PICOFARADS | 5.8 MAXIMUM |
| SPECIFIED FREQUENCY | 32.352 KILOHERTZ |
| FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | M0.002/P0.002 |
| OPERATING TEMP RANGE | -40.0 TO +70.0 DEG CELSIUS |
| EQUIVALENT RESISTANCE VALUE IN OHMS | 90000.0 MAXIMUM |
| DRIVE LEVEL RATING | 0.1 MILLIWATTS NOMINAL |
| STYLE DESIGNATOR | OVAL BODY, PIN TERMINALS |
| OVERALL LENGTH | 1.774 INCHES MAXIMUM |
| TERMINAL LENGTH | 0.223 INCHES MINIMUM AND 0.248 INCHES MAXIMUM |
| OVERALL WIDTH | 0.757 INCHES MAXIMUM |
| BODY LENGTH | 1.526 INCHES MAXIMUM |
| BODY WIDTH | 0.725 INCHES MAXIMUM |
| BODY THICKNESS | 0.317 INCHES MAXIMUM |
| OVERALL THICKNESS | 0.352 INCHES MAXIMUM |
| TERMINAL DIAMETER | 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.478 INCHES MINIMUM AND 0.494 INCHES MAXIMUM |
| HOLDER COVER MATERIAL | METAL |
| TEST DATA DOCUMENT | 81349-MILC3098 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MILC3098 TO 28D GOVERNMENT SPECIFICATION |
