NSN 5962-00-443-9541
Part Details | DIGITAL MICROCIRCUIT
5962-00-443-9541 A microcircuit specifically designed to generate, modify, or process electrical signals which operate with two distinct or binary states. These states are commonly referred to as on and off, true and false, high and low, or "1" and "0".
Alternate Parts: 807401, 80740-1, SN35470, 807401, 80740-1, 5962-00-443-9541, 00-443-9541, 5962004439541, 004439541
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | MAY 23, 1974 | 00-443-9541 | 31779 ( MICROCIRCUIT, DIGITAL ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5962-00-443-9541
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 80740-1 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
| SN35470 | 01295 | TEXAS INSTRUMENTS INCORPORATEDDBA TEXAS INSTRUMENTS |
| 80740-1 | 07148 | UNITED TECHNOLOGIES CORP HAMILTONSUNDSTRAND CORP |
Technical Data | NSN 5962-00-443-9541
| Characteristic | Specifications |
|---|---|
| OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| DESIGN FUNCTION AND QUANTITY | 1 LATCH, MULTIPLEXER BISTABLE |
| INPUT CIRCUIT PATTERN | 8 INPUT |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | ACVM1.5 VOLTS MINIMUM AND ACV5.5 VOLTS MAXIMUM |
| TIME RATING PER CHACTERISTIC | AEE40.00 NANOSECONDS MAXIMUM AND AED30.00 NANOSECONDS MAXIMUM |
| OPERATING TEMP RANGE | -55.0 TO +125.0 DEG CELSIUS |
| TERMINAL TYPE AND QUANTITY | 16 PRINTED CIRCUIT |
| TERMINAL SURFACE TREATMENT | SOLDER |
| INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| INCLOSURE MATERIAL | CERAMIC AND GLASS |
| BODY LENGTH | 0.747 INCHES MINIMUM AND 0.815 INCHES MAXIMUM |
| BODY HEIGHT | 0.200 INCHES MAXIMUM |
| BODY WIDTH | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| MAXIMUM POWER DISSIPATION RATING | 253.0 MILLIWATTS |
| STORAGE TEMP RANGE | -65.0 TO +150.0 DEG CELSIUS |
| FEATURES PROVIDED | MONOLITHIC AND HERMETICALLY SEALED AND NEGATIVE OUTPUTS AND POSITIVE OUTPUTS |
| TEST DATA DOCUMENT | 07148-80740 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
