NSN 5990-00-557-8412
Part Details | CONTROL TRANSFORMER SYNCHRO
5990-00-557-8412 A synchro consisting of a stator and rotor inductively coupled. The electrical output of the rotor is dependent upon both the position of the rotor and the electrical input to the stator from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, or variable transformers.
Alternate Parts: 1HBCT, 951186REVE, 951186, 5990-00-557-8412, 00-557-8412, 5990005578412, 005578412
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 01, 1963 | 00-557-8412 | 15289 ( SYNCHRO, CONTROL TRANSFORMER ) |
REFERENCE DRAWINGS & PICTURES
STANDARD ROUND, ROTATABLE HOUSING
Cross Reference | NSN 5990-00-557-8412
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1HBCT | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| 951186REVE | 10001 | NAVAIR AND NAVSEA MANAGEDORIGINAL DESIGN ACTIVITY DWG NOT |
| 951186 | 10001 | NAVAIR AND NAVSEA MANAGEDORIGINAL DESIGN ACTIVITY DWG NOT |
Technical Data | NSN 5990-00-557-8412
| Characteristic | Specifications |
|---|---|
| BODY SIZE | 24 |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| STATOR INPUT CURRENT RATING | 35.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 700.0 MILLIWATTS NOMINAL |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| TRANSFORMATION RATIO | 0.735 ROTOR TO STATOR NOMINAL |
| BODY STYLE | STANDARD ROUND, ROTATABLE HOUSING |
| SHOULDER DIAMETER | 2.3750 INCHES MAXIMUM |
| OVERALL LENGTH | 4.6000 INCHES MAXIMUM |
| FLANGE DIAMETER | 2.6230 INCHES MINIMUM AND 2.6250 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| BODY DIAMETER | 2.3750 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.7500 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 2.9100 INCHES NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | ALUMINUM ALLOY |
| TEST DATA DOCUMENT | 10001-951186 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| SHAFT MAXIMUM RUNOUT | 0.0005 INCHES |
