NSN 5990-00-796-1728
Part Details | LINEAR ELECTRICAL RESOLVER
5990-00-796-1728 An item consisting of a stator and rotor inductively coupled which provides accurate linear indication of shaft rotation about a reference position in the form of a polarized voltage whose magnitude is proportional to angular displacement and phase relationship indicates direction of shaft rotation. Its windings and slots are not uniformly distributed, but instead are deliberately modified to produce a linear output which is usually limited to less than plus or minus 90 degrees of effective electrical travel. Normally it has only one energization winding and one output winding. See also RESOLVER, ELECTRICAL.
Alternate Parts: 129029927, 1290299-27, AY51110A1, AY-511-10-A1, 5990-00-796-1728, 00-796-1728, 5990007961728, 007961728
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 01, 1962 | 00-796-1728 | 31780 ( RESOLVER, ELECTRICAL, LINEAR ) |
REFERENCE DRAWINGS & PICTURES
STANDARD ROUND C
Cross Reference | NSN 5990-00-796-1728
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1290299-27 | 55972 | HONEYWELL INTL INCDEFENSE AVIONICS SYSTEMS |
| AY-511-10-A1 | 55972 | HONEYWELL INTL INCDEFENSE AVIONICS SYSTEMS |
Technical Data | NSN 5990-00-796-1728
| Characteristic | Specifications |
|---|---|
| BODY SIZE | 10 |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| BODY STYLE | STANDARD ROUND C |
| SHOULDER DIAMETER | 0.8118 INCHES MINIMUM AND 0.8123 INCHES MAXIMUM |
| PILOT DIAMETER | 0.4995 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| OVERALL LENGTH | 1.4280 INCHES NOMINAL |
| FLANGE DIAMETER | 0.9370 INCHES MINIMUM AND 0.9470 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 0.8350 INCHES MINIMUM AND 0.8400 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0590 INCHES MINIMUM AND 0.0650 INCHES MAXIMUM |
| PILOT LENGTH | 0.0350 INCHES MINIMUM AND 0.0410 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.0600 INCHES MINIMUM AND 0.0660 INCHES MAXIMUM |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2380 INCHES MINIMUM AND 1.2440 INCHES MAXIMUM |
| ALIGNMENT HOLE DEPTH | 0.0781 INCHES MAXIMUM |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.6780 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 3 |
| TERMINAL TYPE AND QUANTITY | 4 WIRE LEAD |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| SHAFT RADIAL PLAY TEST POINT | 0.125 INCHES NOMINAL |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| SHAFT END PLAY | 0.0005 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM |
| SHAFT END PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| SCHEMATIC DIAGRAM DESIGNATOR | |
| FRAGILITY FACTOR | MODERATELY RUGGED |
