NSN 5990-00-912-8850
Part Details | CONTROL TRANSFORMER SYNCHRO
5990-00-912-8850 A synchro consisting of a stator and rotor inductively coupled. The electrical output of the rotor is dependent upon both the position of the rotor and the electrical input to the stator from a transmitter synchro or a differential synchro. Does not include variable resistors, goniometers, or variable transformers.
Alternate Parts: 400492, 400492, 400492, 5990-00-912-8850, 00-912-8850, 5990009128850, 009128850
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | JAN 01, 1960 | 00-912-8850 | 15289 ( SYNCHRO, CONTROL TRANSFORMER ) |
REFERENCE DRAWINGS & PICTURES
STANDARD ROUND C
Cross Reference | NSN 5990-00-912-8850
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 400492 | 20284 | AIMTRON SYSTEMS LLCDBA TARGET |
| 400492 | 12909 | CARDION INC |
| 400492 | 10112 | GENERAL DYNAMICS GLOBAL IMAGINGTECHNOLOGIES, INC. |
Technical Data | NSN 5990-00-912-8850
| Characteristic | Specifications |
|---|---|
| BODY SIZE | 15 |
| STATOR INPUT VOLTAGE RATING IN VOLTS | 90.0 NOMINAL |
| STATOR INPUT CURRENT RATING | 24.0 MILLIAMPERES NOMINAL |
| STATOR INPUT ELECTRICAL POWER RATING | 600.0 MILLIWATTS NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| ZSO IMPEDANCE MAGNITUDE IN OHMS | 7800.00 NOMINAL |
| ZSO IMPEDANCE ANGLE IN DEG | 79.67 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 573.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 930.00 NOMINAL |
| TRANSFORMATION RATIO | 0.720 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 5.140 INPUT TO OUTPUT NOMINAL |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 40.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | M3.0/P3.0 |
| TORQUE GRADIENT PER ANGULAR DEG | 0.030 INCH-OUNCES NOMINAL |
| BODY STYLE | STANDARD ROUND C |
| SHOULDER DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| PILOT DIAMETER | 0.8745 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| OVERALL LENGTH | 2.3020 INCHES MINIMUM AND 2.3220 INCHES MAXIMUM |
| FLANGE DIAMETER | 1.4340 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND 0.0960 INCHES MAXIMUM |
| UNDERCUT DIAMETER | 1.3090 INCHES MINIMUM AND 1.3150 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0750 INCHES MINIMUM AND 0.0810 INCHES MAXIMUM |
| PILOT LENGTH | 0.0370 INCHES MINIMUM AND 0.0430 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.1290 INCHES MINIMUM AND 0.1350 INCHES MAXIMUM |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7720 INCHES NOMINAL |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 1.0970 INCHES NOMINAL |
| ALIGNMENT HOLE QUANTITY | 4 |
| SECURING HOLE QUANTITY | 4 |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.884 INCHES |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | ANY ACCEPTABLE |
