NSN 5990-01-189-3201
Part Details | TRANSMITTER SYNCHRO
5990-01-189-3201 A synchro consisting of a stator and rotor inductively coupled. The electrical output of the stator into a receiver synchro, a control transformer or differential synchro is dependent upon the position of its rotor. Does not include variable resistors, goniometers, variable transformers, or items with dials.
Alternate Parts: M20708806C, M20708/8-06C, MILS207088, MIL-S-20708/8, 5990-01-189-3201, 01-189-3201, 5990011893201, 011893201
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | SEP 14, 1984 | 01-189-3201 | 02073 ( SYNCHRO, TRANSMITTER ) |
REFERENCE DRAWINGS & PICTURES
STANDARD ROUND B
Cross Reference | NSN 5990-01-189-3201
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| M20708/8-06C | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-S-20708/8 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5990-01-189-3201
| Characteristic | Specifications |
|---|---|
| BODY SIZE | 11 |
| ROTOR INPUT VOLTAGE RATING IN VOLTS | 26.0 NOMINAL |
| ROTOR INPUT CURRENT RATING | 130.0 MILLIAMPERES MAXIMUM |
| ROTOR INPUT ELECTRICAL POWER RATING | 340.0 MILLIWATTS NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| ZRO IMPEDANCE MAGNITUDE IN OHMS | 200.00 MINIMUM AND 300.00 MAXIMUM |
| ZRO IMPEDANCE ANGLE IN DEG | 80.50 MINIMUM AND 84.00 MAXIMUM |
| ZSS IMPEDANCE MAGNITUDE IN OHMS | 6.00 MINIMUM AND 12.00 MAXIMUM |
| ZSS IMPEDANCE ANGLE IN DEG | 18.00 MINIMUM AND 30.00 MAXIMUM |
| TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 4.000 INPUT TO OUTPUT NOMINAL |
| MAXIMUM TEMP RISE | 20.0 DEG CELSIUS |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 12.00 OUTPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 19.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | M7.0/P7.0 |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 0.07 INCH-OUNCES MAXIMUM |
| BODY STYLE | STANDARD ROUND B |
| SHOULDER DIAMETER | 1.0000 INCHES NOMINAL |
| PILOT DIAMETER | 0.6250 INCHES NOMINAL |
| OVERALL LENGTH | 2.4180 INCHES NOMINAL |
| FLANGE DIAMETER | 1.0620 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0930 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| SHOULDER LENGTH | 0.0620 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.7940 INCHES NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 SCREW |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, CORROSION RESISTING |
| TEST DATA DOCUMENT | 81349-MIL-S-20708 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL--20708 TO 8 GOVERNMENT SPECIFICATION |
| SHAFT MAXIMUM RADIAL PLAY | 0.0006 INCHES |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT END PLAY | 0.0100 INCHES NOMINAL |
| SHAFT END PLAY DETERMINING WEIGHT | 1.0 OUNCES |
