NSN 5999-00-454-5325
Part Details | DELAY LINE
5999-00-454-5325 An item which provides a predetermined delay to an electrical pulse, while maintaining substantially the same waveform. The delay is obtained by means of a real or artificial transmission line or equivalent device. The equivalent device may be acoustic, distributive, lumped constant, magnetic solid state, or surface acoustical wave type. See also ATTENUATOR, (as modified); TRANSFORMER, (as modified); and OSCILLATOR, PULSE DELAY.
Alternate Parts: 0300D0145, D1634, FS4545325, FS4545-325, 0300D0145, 10549172, 10549172, 5999-00-454-5325, 00-454-5325, 5999004545325, 004545325
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | APR 14, 1969 | 00-454-5325 | 06373 ( DELAY LINE ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR, FRONT CONNECTION
2 POSITION IN-LINE
Cross Reference | NSN 5999-00-454-5325
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 0300D0145 | 94117 | BAE SYSTEMS INFORMATION ANDELECTRONIC SYSTEMS INTEGRATION INC. |
| D1634 | 14948 | COMPUTER DEVICES CORP |
| FS4545-325 | 56662 | FREQUENCY SELECTIVE NETWORKS INC |
| 0300D0145 | 87557 | LOCKHEED CORPLOCKHEED ELECTRONICS CO INC |
| 10549172 | 55097 | SHILOH INDUSTRIES, INC. |
| 10549172 | 19200 | US ARMY ARDEC RDECOM |
Technical Data | NSN 5999-00-454-5325
| Characteristic | Specifications |
|---|---|
| SIGNAL DELAY METHOD | ELECTROMECHANICAL |
| DELAY TIME VARIATION METHOD | TAPPED |
| INDIVIDUAL SECTION QUANTITY | 1 |
| SEGMENT QUANTITY PER SECTION | 26 SINGLE SECTION |
| OPERATING TEMP RANGE | -40.0 TO +175.0 DEG FAHRENHEIT |
| INPUT IMPEDANCE RATING | 100.000 OHMS |
| ATTENUATION IN DECIBELS | 2.000 |
| PULSE RISE TIME RATING | 100.0 NANOSECONDS |
| BODY STYLE | RECTANGULAR, FRONT CONNECTION |
| OVERALL DEPTH | 1.114 INCHES NOMINAL |
| BODY LENGTH | 5.875 INCHES NOMINAL |
| BODY WIDTH | 1.328 INCHES NOMINAL |
| BODY DEPTH | 0.926 INCHES NOMINAL |
| MATERIAL AND LOCATION | ANY ACCEPTABLE OVERALL |
| TERMINAL TYPE AND QUANTITY | 26 TAB SOLDER LUG |
| MOUNTING FACILITY | UNTHREADED HOLE |
| MOUNTING FACILITY QUANTITY | 2 |
| HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| MOUNTING PROVISION ARRANGEMENT STYLE | 2 POSITION IN-LINE |
| LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 5.318 INCHES MINIMUM AND 5.338 INCHES MAXIMUM |
| TEST DATA DOCUMENT | 19200-10549172 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
