NSN 6645-01-469-9063
Part Details | SEQUENTIAL TIMER
6645-01-469-9063 An item which actuates included electrical contacts and/or switches in an orderly succession, and at a predetermined interval(s) for the purpose of controlling the operation of another electrical device(s). May have provision for manually establishing an operational sequence or cycle. See also RELAY, MOTOR DRIVEN; TIMER, INTERVAL; KEYER (as modified); CHRONOMETER, MAKE-BREAK CIRCUIT and INTERVALOMETER (as modified).
Alternate Parts: BRL001, Q3F00010327, Q3F-00010-327, 6645-01-469-9063, 01-469-9063, 6645014699063, 014699063
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 66 | NOV 30, 1999 | 01-469-9063 | 61237 ( TIMER, SEQUENTIAL ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 6645-01-469-9063
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| BRL001 | 1GD22 | GENERAL DYNAMICS SATCOMTECHNOLOGIES, INC. |
| Q3F-00010-327 | 28081 | NATIONAL CONTROLS CORP |
Technical Data | NSN 6645-01-469-9063
| Characteristic | Specifications |
|---|---|
| TIMER TYPE | E ANY ACCEPTABLE |
| CURRENT TYPE | AC AND DC |
| VOLTAGE IN VOLTS | 24.0 |
| FREQUENCY IN HERTZ | B50.0$B60.0 |
| DC OPERATED CLUTCH | NOT INCLUDED |
| RESET TYPE | ELECTRIC |
| CONTROL TYPE | BE ANY ACCEPTABLE |
| AUTOMATIC ELECTRIC CIRCUIT CONTROL SWITCH | NOT INCLUDED |
| MOUNTING METHOD | SURFACE |
| INDEPENDENTLY OPERATED CLOCK | NOT INCLUDED |
| OVERALL HEIGHT | 2.000 INCHES NOMINAL |
| OVERALL WIDTH | 2.000 INCHES NOMINAL |
| OVERALL DEPTH | 1.250 INCHES NOMINAL |
| SPECIAL FEATURES | TIME DELAY ADJUSTMENT IS THROUGH AN EXTERNAL RESISTOR (1 MEGOHM MAX TO 0.250 WATT MIN. RECOMMEDED) WITH A RANGE OF 0.5 TO 10.0 SECONDS; REVERSE POLARITY PROTECTION; FLAME RETARDENT AND SOLVENT RESISTANT POLYESTER THERMOPLASTIC HOUSING; OUTPUT TYPE, SOLID STATE, NORMALLY OPEN; 1 AMP STEADY STATE OUTPUT RATING; TRANSIENT VOLTAGE PROTECTION THROUGH METAL OXIDE VARISTOR; DIELECTRIC BREAKDOWN, 3000 VAC, RMS, TERMINALS TO MOUNTING; INSULATION RESISTANCE 100 MEGAOHMS MINIMUM BETWEEN TERMINALS AND CASE; TERMINALS (7) ARE 0.250 IN. BY 0.032 IN. MALE FAST-ON; UNIT IS MOUNTED USING ONE NO. 8 SCREW THROUGH 0.170 IN. UNTHREADED HOLE LOCATED IN CENTER OF FACE; STORAGE TEMPERATURE MINUS 40 TO PLUS 85 DEG. C; OPERATING TEMPERATURE MINUS 40 TO PLUS 65 DEG. C; HUMIDITY TO 95 PERCENT RELATIVE |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SOLID-STATE CUBE TIMER |
