NSN 9390-00-250-8670
Part Details | NONMETALLIC CHANNEL
9390-00-250-8670 A structural shape fabricated from nonmetallic material(s) having two vertical flanges that extend in the same direction from each end of a horizontal base. The vertical flanges may have various type tips and additional flanges which extend on the same plane as the base. It may have a reinforcing agent(s) and backing Excludes SEAL, NONMETALLIC CHANNEL.
Alternate Parts: S17769N7, S-17769-N-7, ASO4407, ASO-440-7, 9390-00-250-8670, 00-250-8670, 9390002508670, 002508670
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 93 | JAN 01, 1963 | 00-250-8670 | 30218 ( NONMETALLIC CHANNEL ) |
REFERENCE DRAWINGS & PICTURES
OPEN CHANNEL
LEFT INSIDE TAPER W/OUTSIDE RADIUS
RIGHT INSIDE TAPER W/OUTSIDE RADIUS
Cross Reference | NSN 9390-00-250-8670
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| S-17769-N-7 | 18355 | BOEING COMPANY, THEDBA BOEING |
| ASO-440-7 | 80132 | NAVAL INVENTORY CONTROL POINT |
Technical Data | NSN 9390-00-250-8670
| Characteristic | Specifications |
|---|---|
| CROSS-SECTIONAL SHAPE STYLE | OPEN CHANNEL |
| OVERALL HEIGHT | 0.218 INCHES NOMINAL |
| OVERALL WIDTH | 0.125 INCHES NOMINAL |
| RIGHT SIDE FLANGE HEIGHT | 0.188 INCHES NOMINAL |
| LEFT SIDE FLANGE THICKNESS | 0.031 INCHES NOMINAL |
| RIGHT SIDE FLANGE THICKNESS | 0.031 INCHES NOMINAL |
| FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | 0.031 INCHES NOMINAL |
| OUTER RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | 0.031 INCHES NOMINAL |
| BASE FLANGE THICKNESS | 0.031 INCHES NOMINAL |
| OUTER RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE | 0.031 INCHES NOMINAL |
| FILLET RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE | 0.031 INCHES NOMINAL |
| LEFT-SIDE FLANGE TIP STYLE | 1 LEFT INSIDE TAPER W/OUTSIDE RADIUS |
| RIGHT-SIDE FLANGE TIP STYLE | 1 RIGHT INSIDE TAPER W/OUTSIDE RADIUS |
| MATERIAL | |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3241 NATIONAL SPEC SINGLE MATERIAL RESPONSE |
| NONMETALLIC HARDNESS RATING | 55.0 MINIMUM SHORE DUROMETER A AND 65.0 MAXIMUM SHORE DUROMETER A |
| MINIMUM TENSILE STRENGTH | 1500 POUNDS PER SQUARE INCH |
| ENVIRONMENTAL PROTECTION | WEATHER RESISTANT |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY LENGTH |
