NSN 9390-00-618-4797
Part Details | NONMETALLIC CHANNEL
9390-00-618-4797 A structural shape fabricated from nonmetallic material(s) having two vertical flanges that extend in the same direction from each end of a horizontal base. The vertical flanges may have various type tips and additional flanges which extend on the same plane as the base. It may have a reinforcing agent(s) and backing Excludes SEAL, NONMETALLIC CHANNEL.
Alternate Parts: 1049048, 1049048, S1049048, S1049048, 9390-00-618-4797, 00-618-4797, 9390006184797, 006184797
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 93 | JAN 01, 1963 | 00-618-4797 | 30218 ( NONMETALLIC CHANNEL ) |
REFERENCE DRAWINGS & PICTURES
OPEN CHANNEL
LEFT INSIDE TAPER W/OUTSIDE RADIUS
RIGHT INSIDE TAPER W/OUTSIDE RADIUS
Cross Reference | NSN 9390-00-618-4797
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1049048 | 88277 | BOEING COMPANY, THEDBA BOEING |
| 1049048 | 18355 | BOEING COMPANY, THEDBA BOEING |
| S1049048 | 88277 | BOEING COMPANY, THEDBA BOEING |
| S1049048 | 18355 | BOEING COMPANY, THEDBA BOEING |
Technical Data | NSN 9390-00-618-4797
| Characteristic | Specifications |
|---|---|
| CROSS-SECTIONAL SHAPE STYLE | 9 OPEN CHANNEL |
| OVERALL HEIGHT | 0.344 INCHES NOMINAL |
| OVERALL WIDTH | 1.438 INCHES NOMINAL |
| RIGHT SIDE FLANGE HEIGHT | 0.344 INCHES NOMINAL |
| LEFT SIDE FLANGE THICKNESS | 0.156 INCHES NOMINAL |
| RIGHT SIDE FLANGE THICKNESS | 0.156 INCHES NOMINAL |
| BASE FLANGE THICKNESS | 0.188 INCHES NOMINAL |
| LEFT-SIDE FLANGE TIP STYLE | 1 LEFT INSIDE TAPER W/OUTSIDE RADIUS |
| LEFT SIDE TOP FLANGE THICKNESS | 0.125 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE WIDTH | 0.406 INCHES NOMINAL |
| RIGHT-SIDE FLANGE TIP STYLE | 1 RIGHT INSIDE TAPER W/OUTSIDE RADIUS |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.125 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE WIDTH | 0.406 INCHES NOMINAL |
| LENGTH | 96.000 INCHES MINIMUM AND 120.000 INCHES MAXIMUM |
| MATERIAL | |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3207 NATIONAL SPEC SINGLE MATERIAL RESPONSE |
| NONMETALLIC HARDNESS RATING | 25.0 MINIMUM SHORE DUROMETER A AND 35.0 MAXIMUM SHORE DUROMETER A |
| MINIMUM TENSILE STRENGTH | 500 POUNDS PER SQUARE INCH |
| ENVIRONMENTAL PROTECTION | OIL RESISTANT AND TEAR AND LOW TEMPERATURE AND HEAT DRY AND HIGH TEMPERATURE |
