NSN 9390-00-618-5523
Part Details | NONMETALLIC CHANNEL
9390-00-618-5523 A structural shape fabricated from nonmetallic material(s) having two vertical flanges that extend in the same direction from each end of a horizontal base. The vertical flanges may have various type tips and additional flanges which extend on the same plane as the base. It may have a reinforcing agent(s) and backing Excludes SEAL, NONMETALLIC CHANNEL.
Alternate Parts: M256, MILR6855, 9390-00-618-5523, 00-618-5523, 9390006185523, 006185523
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 93 | JAN 01, 1963 | 00-618-5523 | 30218 ( NONMETALLIC CHANNEL ) |
REFERENCE DRAWINGS & PICTURES
OPEN CHANNEL
LEFT INSIDE TAPER W/OUTSIDE RADIUS
RIGHT INSIDE TAPER W/OUTSIDE RADIUS
Cross Reference | NSN 9390-00-618-5523
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| M256 | 74013 | BRABROOK A N INC |
| MILR6855 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 9390-00-618-5523
| Characteristic | Specifications |
|---|---|
| CROSS-SECTIONAL SHAPE STYLE | OPEN CHANNEL |
| OVERALL HEIGHT | 0.938 INCHES NOMINAL |
| OVERALL WIDTH | 0.250 INCHES NOMINAL |
| RIGHT SIDE FLANGE HEIGHT | 0.938 INCHES NOMINAL |
| LEFT SIDE FLANGE THICKNESS | 0.063 INCHES NOMINAL |
| RIGHT SIDE FLANGE THICKNESS | 0.063 INCHES NOMINAL |
| FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | 0.063 INCHES NOMINAL |
| OUTER RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | 0.125 INCHES NOMINAL |
| BASE FLANGE THICKNESS | 0.063 INCHES NOMINAL |
| OUTER RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE | 0.125 INCHES NOMINAL |
| FILLET RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE | 0.063 INCHES NOMINAL |
| LEFT-SIDE FLANGE TIP STYLE | 1 LEFT INSIDE TAPER W/OUTSIDE RADIUS |
| RIGHT-SIDE FLANGE TIP STYLE | 1 RIGHT INSIDE TAPER W/OUTSIDE RADIUS |
| LENGTH | 96.000 INCHES MINIMUM AND 120.000 INCHES MAXIMUM |
| MATERIAL | RUBBER SYNTHETIC |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-6855, CLASS 4, TYPE A, GRADE 80 MIL SPEC SINGLE MATERIAL RESPONSE |
| NONMETALLIC HARDNESS RATING | 75.0 MINIMUM SHORE DUROMETER A AND 85.0 MAXIMUM SHORE DUROMETER A |
| MINIMUM TENSILE STRENGTH | 1500 POUNDS PER SQUARE INCH |
| ENVIRONMENTAL PROTECTION | OIL RESISTANT AND OZONE RESISTANT AND WEATHER RESISTANT |
| NONDEFINITIVE SPEC/STD DATA | A TYPE AND 80 GRADE AND 4 CLASS AND EXTRUDED SHAPE FORM |
