NSN 9390-00-618-6921
Part Details | NONMETALLIC CHANNEL
9390-00-618-6921 A structural shape fabricated from nonmetallic material(s) having two vertical flanges that extend in the same direction from each end of a horizontal base. The vertical flanges may have various type tips and additional flanges which extend on the same plane as the base. It may have a reinforcing agent(s) and backing Excludes SEAL, NONMETALLIC CHANNEL.
Alternate Parts: 17157382, 1715738-2, MILR3065, 9390-00-618-6921, 00-618-6921, 9390006186921, 006186921
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 93 | JAN 01, 1963 | 00-618-6921 | 30218 ( NONMETALLIC CHANNEL ) |
REFERENCE DRAWINGS & PICTURES
OPEN CHANNEL
LEFT INSIDE TAPER W/OUTSIDE RADIUS
RIGHT INSIDE TAPER W/OUTSIDE RADIUS
Cross Reference | NSN 9390-00-618-6921
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1715738-2 | 56232 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN |
| MILR3065 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 9390-00-618-6921
| Characteristic | Specifications |
|---|---|
| CROSS-SECTIONAL SHAPE STYLE | OPEN CHANNEL |
| OVERALL HEIGHT | 0.218 INCHES NOMINAL |
| OVERALL WIDTH | 0.171 INCHES NOMINAL |
| RIGHT SIDE FLANGE HEIGHT | 0.218 INCHES NOMINAL |
| LEFT SIDE FLANGE THICKNESS | 0.062 INCHES NOMINAL |
| RIGHT SIDE FLANGE THICKNESS | 0.062 INCHES NOMINAL |
| FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | 0.016 INCHES NOMINAL |
| OUTER RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | 0.078 INCHES NOMINAL |
| BASE FLANGE THICKNESS | 0.062 INCHES NOMINAL |
| OUTER RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE | 0.078 INCHES NOMINAL |
| FILLET RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE | 0.015 INCHES NOMINAL |
| LEFT-SIDE FLANGE TIP STYLE | 1 LEFT INSIDE TAPER W/OUTSIDE RADIUS |
| RIGHT-SIDE FLANGE TIP STYLE | 1 RIGHT INSIDE TAPER W/OUTSIDE RADIUS |
| LENGTH | 1.750 INCHES NOMINAL |
| MATERIAL | RUBBER SYNTHETIC |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-STD-417, TYPE S, CLASS SB, GRADE SB612F2 MIL STD SINGLE MATERIAL RESPONSE |
| NONMETALLIC HARDNESS RATING | 55.0 MINIMUM SHORE DUROMETER A AND 65.0 MAXIMUM SHORE DUROMETER A |
| MINIMUM TENSILE STRENGTH | 1200 POUNDS PER SQUARE INCH |
| TEMP RATING | -67.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT |
| ENVIRONMENTAL PROTECTION | FUEL, AROMATIC AND OIL RESISTANT AND LOW TEMPERATURE AND HIGH TEMPERATURE |
